What's Included (depending on the model selected)

Starter Kit

• 1 handle (depending on your choice: loop or ball)
• 1 handle (depending on the desired working height: 116 cm or 104 cm)
• 1x ejector
• 1x base plate with cutting line
• 1 rearing box
• 1 shelf
• 1 compressor
• 4 stackable system columns
• 1 coaster

XXL Starter Kit

• 1 handle (depending on your choice: loop or ball)
• 1 handle (depending on the desired working height: 116 cm or 104 cm)
• 1x ejector
• 1x base plate with cutting line
• 3x rearing box
• 3 adjustable shelves
• 1 compressor
• 12 stackable system columns
• 1 coaster

Note: The exact contents of the package depend on the product variant you select. Any other items shown are for illustrative purposes only and are not included in the package.

Installation Recommendations - Lawn Cutter

Our assembly recommendations are intended as a general guide only.
Some recommendations are provided as examples—the color and shape of the parts may vary. However, the basic instructions remain valid.

Required tools, aids and protective equipment:

• No additional tools required
• Optional: medium-strength threadlocker
  

Assembly process:

1. Carefully position the shank against the threaded socket on the base plate and screw it in clockwise by hand until it stops.
   Tip: For added security, you can apply a medium-strength threadlocker to the threads. This may make quick disassembly difficult—use as needed.
2. Place the handle on the thread of the stem and screw it on clockwise until it is tight. Do not overtighten the thread.
   Tip: For the bow-shaped handle, we recommend positioning it horizontally so that the logo aligns with the ejector to ensure ergonomic handling.
3. Align the ejector with the recesses from above and insert it
   

Installation Recommendations - Lawn Seeding System

Our assembly recommendations are intended as a general guide only.
Some recommendations are provided as examples—the color and shape of the parts may vary. However, the basic instructions remain valid.

Required tools, aids and protective equipment:

• No additional tools required
  

Assembly process:

1. Positioning the columns: Position the columns of the stacking system at the four front markings on the turf-growing box.
2. Top assembly: Hook the top of the column onto the designated mark.
3. Installation (bottom): Press the bottom of the column down until it lies flat against the box. Repeat this process for all four columns.
   Note: Hook it in at the top first, then press it down at the bottom—not the other way around.
4. Assembly: Place the box with the columns attached onto the base. Make sure the tabs and holes are aligned. Press down gently from above.
5. Stacking: Place additional boxes with the columns already attached on top and stack them as desired. Ensure the stack is stable and level.

Usage - Lawn Core Drill

Our assembly recommendations are intended as a general guide only.
Some recommendations are provided as examples—the color and shape of the parts may vary. However, the basic instructions remain valid.

Required tools, aids and protective equipment:

• Turf growing box with pre-grown turf section
• Water (for dry or hard soil)
  
• Sturdy footwear

Note:

• If the ground is dry or hard, the repair area should be watered beforehand
• Always guide the tool perpendicular to the surface to ensure clean cut edges
• Do not force entry—do not use a hammer to help break it open
• Remove the ejector before cutting out the dough, as it may be damaged if stepped on
• Cutting and ejection are performed in separate steps
  
• If there is residual moisture in the threaded area, it is recommended that you unscrew the handle before storing it to ensure that it dries completely and to prevent surface rust.

Process:

1. Damaged area: Identify the damaged area for replacement.
2. Watering: If the soil is dry or hard, lightly water the area beforehand.
3. Positioning: Place the lawn corer in the center of the damaged area.
4. Ejector: Be sure to remove the ejector beforehand (see note)
5. 
   : Gradually apply your body weight to the lawn aerator so that it cuts into the ground. Tip: You can help the aerator cut into the ground by gently rocking it back and forth.
6. Press in: Press the tool into the ground until it reaches the base plate.
7. To remove: Gently lift the cookie cutter straight up while swirling it slightly.
8. Insert the ejectors: Insert the ejectors into the designated slots on the base plate.
9. Ejecting: Gently press the ejector to release the defective piece from the cutter by pushing it downward while guiding the tool upward.
10. Select replacement: Select the pre-grown turf section.
11. Removal: Press the turf module from below against the base tray to remove it completely from the turf growing box.
12. Installation: Place the lawn tile into the prepared opening.
13. Smooth out: Gently press down on the transition to the existing surface with your foot.
14. Aftercare: Lightly water the area to help the grass take root.

Application - Lawn Seeding System

Our application recommendations are intended as a general guide only.
Some recommendations are provided as examples—the color and shape of the parts may vary. However, the basic instructions remain valid.

Required tools, aids and protective equipment:

• Lawn substrate / soil-sand mixture in any ratio, as similar as possible to the existing soil.
  Example: Topsoil + quartz sand with a grain size of 0.8–1.6 mm in a 70/30 ratio
• Seeds similar to those of the existing lawn
• Water

Note:

• Markings for filling and compaction serve as a guide
• The actual compaction depends on the substrate and moisture content

Process:

1. Insert the shelf: Place the shelf inside the grass-growing box.
2. Fill with substrate: Evenly fill the box with the first layer of turf substrate up to the top of the first mark.
3. Pre-compaction #1: Use the compactor to press the substrate down to the bottom edge of the first mark.
4. Fill: Add another layer of substrate until it reaches the top edge of the second mark.
5. Pre-compaction #2: Use the compactor to press the substrate down to the bottom edge of the second mark.
6. Sowing: Spread the grass seed evenly over the prepared surface at the desired seeding rate, mimicking the existing lawn as closely as possible.
7. Covering: Fill the box with growing medium up to the top edge to cover the seeds.
8. Scrape off: Evenly remove any excess substrate.
9. Final compaction: Gently press down on the surface to ensure that the grass seeds are firmly in contact with the soil.
10. Watering: Moisten the potting mix evenly and not too heavily the first time, until water begins to drain out from the bottom.
11. Positioning the columns: Position the columns of the stacking system at the four front markings on the turf-growing box. Hook the top of the column onto the designated marking.
12. Installation (bottom): Press the bottom of the column down until it lies flat against the box. Repeat this process for all four columns.
    Note: Hook it in at the top first, then press it down at the bottom—not the other way around.
13. Assembly: Place the box with the columns attached onto the base. Make sure the tabs and holes are aligned.
14. Assembly:Press down gently from above.
15. Stacking: Place additional boxes with the columns already attached on top and stack them as desired. Ensure the stack is stable and level.