Lawn Cultivation System – Modular Cultivation for Lawn Repair
inkl. MwSt.
GRATIS Versand ab Mindestbestellwert
In stock
Beschreibung
Kompatibilität
Technische Daten
Lieferumfang
Scope of delivery (depending on selected variant)
- Lawn growing box (quantity depending on selection)
- Insert shelf (quantity depending on selection)
- Compactor (quantity depending on selection)
- Stacking system column (quantity depending on selection)
- Saucer (quantity depending on selection)
Note: The exact scope of delivery depends on the selected product variant. All other items shown are for illustration purposes only and are not included in the scope of delivery.
Montage
Assembly Recommendation - Turf Growing System
Our assembly recommendations serve as non-binding guidance.
Some recommendations are exemplary – the color and shape of the parts may differ. However, the basic instructions remain valid.
Required tools, aids, and protective equipment:
- No additional tools required
Assembly process:
- Positioning the posts: Position the posts of the stacking system at the four front-end markings of the turf growing box.
- Top assembly: Hook the post into the intended marking at the top.
- Bottom assembly: Press the lower section of the post down until it sits flush against the box. Repeat the process for all four posts.
Note: hook in at the top first, then press down at the bottom - not the other way around. - Setup: Place the box with mounted columns onto the base. Make sure that the tabs and drill holes are aligned. Press down lightly from above.
- Stacking: Place additional boxes with mounted columns on top and stack as desired. Ensure a stable and level standing position.
Anwendung
Application - Lawn Growing System
Our application recommendations are provided as non-binding guidance.
Some recommendations are examples only – the color and shape of the parts may vary. The basic instructions remain valid nonetheless.
Required tools, aids and protective equipment:
- Lawn substrate / soil-sand mixture with any mixing ratio, preferably similar to the existing soil.
Example: topsoil + quartz sand with a grain size of 0.8 - 1.6 mm in a 70 / 30 ratio - Seed material matching the existing lawn
- Water
Note:
- Markings for filling and compaction are for guidance only
- The actual compaction depends on the substrate and moisture level
Procedure:
- Insert base panel: Insert the base panel into the lawn growing box.
- Fill substrate: Evenly fill the first layer of turf substrate into the box up to the top edge of the first marking.
- Pre-compaction #1: Press the substrate down with the compactor to the lower edge of the first marking.
- Top up: Fill in another layer of substrate up to the top edge of the second marking.
- Pre-compaction #2: Press the substrate down with the compactor to the lower edge of the second marking.
- Apply seed: Distribute the lawn seed evenly on the prepared surface with the desired application rate, preferably аналогous to the existing turf.
- Cover: Fill substrate up to the top edge of the turf growing box to cover the seed.
- Level off: Remove excess substrate evenly.
- Final compaction: Lightly press the surface to ensure good soil contact for the lawn seeds.
- Watering: Moisten the substrate evenly and not too heavily at first until water drains out from the bottom..
- Positioning the columns: Position the columns of the stacking system at the four front markings of the lawn growing box. Hook the column onto the intended marking at the top.
- Assembly at the bottom: Press the lower part of the column against the box until it lies flat. Repeat the process for all four columns.
Note: hook in at the top first, then press in at the bottom - not the other way around. - Setup: Place the box with the mounted columns on the saucer. Make sure that the lugs and drill holes align.
- Joining: Press down gently from above.
- Stacking: Place additional boxes with mounted columns on top and stack as desired. Ensure a stable and level position.
Hinweise & Gewährleistung
Das sagen unsere Kunden
Rezensionen von echten Rasenprofis
KEINE AUSGEFRANSTEN HALME MEHR – DER SCHNITT IST EINFACH VITALER UND SAUBERER
PASST PERFEKT. SUPER VERARBEITUNG. SCHNITTERGEBNIS 1A. FAST GERÄUSCHLOS.
FAQ - häufig gestellte Fragen
- Führt der 3D-Druck zu einer unregelmäßigen Oberfläche?
Die Qualität und Optik der Oberflächenstruktur ist ein wesentlicher Bestandteil unserer Produktgestaltung.
Schichthöhe:
Unsere Schichthöhen sind optimal gewählt, um eine perfekte Balance zwischen optischer Qualität und mechanischer Festigkeit zu gewährleisten.
Hochauflösende Drucktechnologien:
Dank fortschrittlicher Druckverfahren entstehen präzise Details und eine gleichmäßige Oberflächenstruktur.
Qualitätsgarantie:
Unsere zoomfähigen Produktbilder ermöglichen dir eine detaillierte Ansicht der Druckoptik und verdeutlichen die hochwertige Verarbeitung.
- Hält das Material der Belastung stand?
Unsere Produkte wurden sorgfältig entwickelt, um auch unter erhöhter Belastung langlebig und sicher zu bleiben.
Hochfestes Material:
Wir verwenden UV- und witterungsbeständige thermoplastische Kunststoffe, die besonders robust und langlebig sind.
Festigkeitsoptimiertes Design:
Die Konstruktion ist speziell darauf ausgelegt, mechanischen Belastungen standzuhalten und eine zuverlässige Leistung zu gewährleisten.
Umfangreiche Tests:
Im Gegensatz zu vielen anderen Herstellern durchlaufen unsere Messerteller Praxislangzeiterprobungen, eine Fliehkraftprüfung zur Festigkeitsbestimmung sowie eine Unwuchtprüfung – während die Systeme anderer oft ungetestet bleiben.
