• 1x base holder
• 1x counter plate
• 1x extension 🔗
• 1x antenna-specific adapter
• 1x mounting screw

Note: Product color as selected. All other items shown are for illustrative purposes only and are not included in the scope of delivery.

Installation recommendation - Performance Smart antenna holder

Our installation recommendations are intended as a non-binding guide.
Some recommendations are examples - the color and shape of the parts may vary. The basic instructions nevertheless remain valid.
If different, the OEM manufacturer's specifications take precedence.

Depending on the selected mounting variant and the mounting material used

Installation options & materials required

Clamping variant using counter plate:
e.g. for mounting on a e.g. for mounting on a 6/5/6 double picket fence

• 4x M4x18 screws

Direct screw connection in hard substrate:
e.g. for mounting on brickwork. e.g. for mounting on brickwork   

• 4x 4.5x40 mm universal screws (half round head / flat head / pan head)
• 4x 6x30 mm dowels

Direct screwing into a soft substrate:
e.g. for mounting on a wooden façade or garden shed. e.g. for mounting on a wooden facade or garden shed

• 4x 4.5x30 mm wood screws / universal screws

Installation procedure for clamping variant:

1. Positioning: Position the base holder with counter plate for clamping. Note side with logo (due to direction of threaded sleeve)
2. Fastening: Tighten counter plate with screws to base holder with moderate torque (approx. 1 Nm)
3. Extension: Attach any number of extensions and screw lightly
   Notes on marking.
4. The marking serves as a guide when screwing the extensions together:
   The mark on the first extension should be aligned approximately in the middle of the base holder
   The marks on the other extensions should be approximately on top of each other

Direct screwing assembly procedure:

1. Preparation: Pre-assemble individual parts horizontally
2. The marking serves as a guide when screwing the extensions together: The mark on the first extension should be aligned approximately in the middle of the base holder
   The marks on the other extensions should be approximately on top of each other
3. Fastening: If necessary, have a second person position and secure the pre-assembled bracket. Carefully screw the base holder in place, ensuring that the cable is not trapped
4. Check: Check whether the cable is lying freely and has been led out to the desired opening without being pinched

Required tools, aids and protective equipment:

• 4mm hexagon socket as a wrench or bit for screwdrivers

Antenna installation procedure:

1. End adapter: Screw on antenna-specific adapter
2. Attach: Screw on the antenna using the antenna-specific adapter already screwed on
3. The markings serve as a guide when screwing the extensions together:
   The markings on the first extension should be aligned approximately in the middle of the base holder
   The markings on the other extensions should be approximately on top of each other
4. Cable feed-through: Thread the cable into the end adapter and lead it out of the desired opening