I think the antenna mount is really high quality and ships fast. I've ordered a lot from them and have been super satisfied with everything—I'm always happy to shop there again 👍👍👍👍
The blades are very sharp—sharper than the original Al-ko-Solo blades. The mowing results are good.
After a week of mowing, they no longer wobble as much as they did when first installed, but they still move out of the way when an obstacle comes into contact with the blade.
I really like the blade plate—the uneven spacing makes it better than the original. In terms of dimensions, everything matches the original (height adjustment). There is one small criticism, though. For the Al-ko-Solo hex screws used to secure the blade plate, either make the countersinks large enough so that the hex screws can be used with a socket wrench, or include the three Allen screws.
I didn't originally buy this blade disc because of the 9 blades, but because of the wider cutting width of 21 cm. My goal was to reduce the small blades of grass that can remain standing due to the RTK offset.
After a week of use, I can say that the purchase was worth it for me. The cut looks more even, and the blades of grass that used to get stuck occasionally are no longer a problem on my lawn. I was particularly surprised that, despite the larger cutting deck and the 9 blades, I didn't notice any increase in battery consumption.
I was also impressed by the build quality. The disc is cleanly manufactured, features high-quality craftsmanship, and the screws look very solid. During my first test run, I also noticed that the disc runs very smoothly and has a pleasant operating noise.
I deliberately chose not to review the blade immediately after installation, but only after several mowing sessions and as the grass grew taller. For my specific use case, it met my expectations, and I would buy it again.
Unfortunately, I'm a little disappointed with how well the spikes work—my tires still spin out.
But I have to say, they really look great.
Hello,
Thank you very much for your feedback and the positive comments on the design.
Like all our products, our spike systems have undergone extensive long-term testing and are now in continuous use in large numbers. They deliver significant improvements in traction even under demanding conditions.
However, the actual improvement in traction achievable always depends on the specific conditions of use. Ground conditions, moisture, slope, and the general condition of the lawn have a decisive influence on the effectiveness.
Since we are not familiar with the on-site conditions, we unfortunately cannot assess the cause in your case. Our support team will be happy to assist you if you send us a few photos of your lawn and the affected areas.
Best regards
Your ZTTLPRINT Team
The film is very well made and is a breeze to apply.
Great product that fits perfectly. Great setup with a much cleaner cut.
Awesome product! It looks like it was made just for us. It's a stylish piece, and I don't need that metal rod—it started rusting just 14 days after I unpacked it.
I just forgot to run the cable through it, but that was my fault.
This is a very good set—everything works perfectly. However, I do have one complaint: every now and then you have to move the blades because they get jammed together and stop mowing. And if I may suggest an improvement, faster shipping would certainly be appreciated. I waited 9 days for my order.
The cut pattern is absolutely amazing!! I have the track width set to the maximum for staggered mowing, which is 14 cm. Speed is 0.4 m/s, and the cutting disc speed is set to "medium."
The checkerboard pattern is practically unnecessary, but I do it anyway because a slightly higher cut produces longer blades, and with the 90-degree offset, everything gets mixed up.
All in all, a very worthwhile upgrade. Top quality and also very easy to install or convert!!
I can absolutely recommend it!
Hi there, I’d like to briefly share my opinion and experience with these blades from ZZLPrint
,
. I’ve been using these blades and the matching blade holder for some time now, and I’m very satisfied with the cutting results and their durability, so I can recommend them without reservation.
I'm very satisfied—the staff is very friendly, the service is fast, and they respond quickly. That's exactly how it should be.
Very well-printed antenna protection that fits this RTK antenna perfectly.
I'm going to leave it in place all winter, and I took the opportunity to give it a quick coat of paint to protect it better.
I ordered the large set with plates and blades for my yuka. Everything arrived super quickly and in good condition. Installation was easy and the quality is great. After 5 months I had a problem with one of the plates and after a quick WhatsApp message to zttlprint, I received a new one free of charge. I can absolutely recommend everything!
Unfortunately, the hinges and the lock broke off because the blades were not inserted correctly.
Hello Gerd,
Thank you very much for your positive feedback and the detailed review.
It looks like the toolbox has been damaged during transportation. We will of course be happy to send you a replacement and will contact you directly.
Thank you and best regards
Your ZTTLPRINT team